Service and Maintenance | Updating the firmware 12 12.4 Updating the firmware The files for the basic firmware and for reloadable modules are contained in the software download area at www.heidenhain.com . Please also note the current information in the Addendum and the Release Notes.
Preparing the update Unpack the downloaded ZIP file to the computer Insert a suitable microSD memory card in the computer Delete any old firmware files with the extension *.bin that may be stored on the microSD memory card Save the unpacked new firmware file with the extension .*bin to the microSD memory card Updating the basic firmware Switch off the product Insert the microSD memory card into the slot (X4) of the product Switch on the product Tap the Module management menu Swipe right to left to the Module management memory card screen Tap the firmware file Tap Programming Follow the instructions of the wizard The firmware is activated and written to the flash memory. Further information:
"Module management memory card screen", Page 136 Managing the basic firmware The basic firmware is managed in the Module management menu, because the basic firmware is also considered to be a module. As opposed to other modules, the following constraints apply to the basic firmware: The basic firmware must be stored in the flash memory of the product The basic firmware can be updated, but it cannot be deleted After the basic firmware has been updated, the product will automatically be restarted 148 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024