Removal and Disposal | Overview 14 14.1 Overview This chapter contains information and environmental protection specifications that must be observed for correct disassembly and disposal of the device. 14.2 Removal from numerically controlled machines WARNING Serious personal injury or property damage caused by improper use of the NC!
Improper use caused by incorrect operation of the NC, incorrect NC programming, incorrect or non-optimized machine parameter values Observe the safety precautions applicable for the installation Acquire fundamental knowledge about machine, servo drives, inverters and NCs as well as their interaction with the encoders so that faulty behavior of a numerically controlled machine can be assessed correctly Apart from the information in these instructions, observe the specific safety regulations and accident prevention regulations when handling the respective machines, drives, inverters, and NCs When the product is removed from a machine or used in other special applications, all safety precautions detailed in these instructions must be adapted to the respective conditions of use Comply particularly with the required adaptations to changed grounding situations during installation and during connection of the product to the control loop of a numerically controlled machine The machine manufacturer must be contacted for fault diagnosis 154 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024