2 Safety | Personnel qualification 2.4 Personnel qualification Mounting, installation, operation, maintenance, and disassembly must be done by a qualified service technician. The service technician must have obtained sufficient information from the documentation supplied with the product and with the connected peripherals. The service technician uses and operates the device within the framework specified for the intended use. The service technician has been specially trained for the environment he or she works in.
The service technician has the required technical training, knowledge and experience and is familiar with the applicable standards and regulations, and is thus capable of performing the assigned work regarding the application concerned and of proactively identifying and avoiding potential risks. He or she must comply with the provisions of the applicable legal regulations on accident prevention. 2.5 Obligations of the operating company The operating company owns or leases the device and the peripherals. At all times, the operating company is responsible for ensuring that the intended use is complied with. The operating company must:
Assign the different tasks to be performed on the device to suitable, qualified and authorized personnel Verifiably train the personnel in the authorizations and tasks Provide all materials and means necessary in order for the personnel to complete the assigned tasks Ensure that the device is operated only when in perfect technical condition Ensure that the device is protected from unauthorized use 2.6 General safety precautions The safety of any system incorporating the use of this product is the responsibility of the assembler or installer of the system. The product supports the use of a wide variety of peripheral devices from different manufacturers.
HEIDENHAIN cannot make any statements on the specific safety precautions to be taken for these devices. The safety precautions provided in the respective documentation must be observed. If there is no documentation at hand, it must be obtained from the manufacturers concerned. The specific safety precautions required for the individual activities to be performed on the product are indicated in the respective sections of these instructions. HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 19