Basic Operation | Switch-on/Switch-off 6 6.7 Switch-on/Switch-off Switching on the product The product is switched on as soon as you connect the power plug to the power outlet. The product is switched off by disconnecting it from the power source. The product can be switched on when an encoder is connected to it or when no encoder is connected to it. Verify that the encoder is connected correctly to the product before you switch it on. Connect the connector of the wall adapter power supply to connection X3 on the left side panel of the product Connect the wall adapter power supply to the power outlet The product starts up. A warning is displayed on the product's screen. Figure 4:
Warning during start-up process Tap OK The Main Menu is opened Switching off the product Disconnect the wall adapter power supply from the power outlet Disconnect the connector of the wall adapter power supply from connection X3 on the left side panel of the product The product is disconnected from the power source and switched off. 6.8 Setting the language The default language for the user interface is English. Setting the language Tap Settings in the Main Menu The Language settings screen is opened. Tap the appropriate flag for the desired language The Language changed message is displayed. Tap OK The user interface is displayed in the selected language.
48 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024