Lubrication and Service - Section 40 08/11 OM4041 Page 40-8 1000 HOUR INSPECTION In addition to the 250 and 500 hour lubrication and inspection schedules, perform the following: 1 2 3 4 5 Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS PARKING BRAKE - Parking brake linkage - 6 points - Lube key "D". TRANSMISSION CASE - a. Drain oil, remove and replace element. Remove clean, and reinstall strainer. Refill sump with oil - Capacity, approximately 153 liters (40.5 gal). Lube key "C". b.
Remove and clean the three transmission magnetic strainers. Refer to the shop manual, Section F, Transmission. STEERING, BRAKE, HOIST, & REAR BRAKE COOLING OIL FILTERS - Relieve pressure before opening the system. Remove and replace the four filter elements. Refer to Hydraulic Tank Service in this chapter. FRONT & REAR BRAKE WEAR - Refer to the shop manual Section J, Brake System, for proper inspec- tion procedure. Perform the inspection when the oil temperature is below 60°C (140°F). Hot oil may cause serious per- sonal injury. ENGINE BREATHER - Remove and clean the engine breather. Refer to the engine service manual.