SETUP AND MAINTENANCE Setting the Option Code 1. Press and hold the MODE switch Speed Limit until "Cd:dP" is displayed. A warning can be displayed if the machine exceeds a 2. Press the MODE switch once. preset speed. The display will show: The available range is: 10 - 99 km/h (6 - 62 mph). It is 3. Press the MODE switch once. recommended to set the speed limit to 99 km/h (62 The display will show: mph). 4. Press the MODE switch repeat- edly until "OP.XX" is displayed. Setting The Speed Limit 5. Press the LIGHT/INC switch to 1. Press and hold the MODE switch change the "unit digit" to the desired number. until "Cd:dP" is flashing. 6. Press the TOTAL/SFT switch and 2.
Press the MODE switch once. the display will then indicate: The display will show: 7. Press the LIGHT/INC switch to 3. Press the MODE switch once. change the "tens digit" to the desired number. The display will show: 8. Press the MODE switch to return to normal 4. Press the MODE switch repeat- operation. edly until "SP.XX" is displayed. 9. The Option Code selects the PLM II™ commu- 5. Press the LIGHT/INC switch to nication mode as follows: change the "unit digit" to the desired number. 6. Press the TOTAL/SFT switch and the display will then indicate: Option Code COMMUNICATION MODE 7. Press the LIGHT/INC switch to 0 Stand Alone change the "tens digit" to the desired number.
10 PMC Mode (530M/HD1500 only) 8. Press MODE switch to return to normal opera- tion. Modular Mining Mode, Scoreboard 12 and User Data Communication Mode NOTES: 1. The Option Code is set to "0" for trucks not equipped with Modular Mining System (MMS) (Except 530M/HD1500). 2. The 530M/HD1500 with Powertrain Manage- ment Control (PMC) system uses "10" as the setting for the Option Code. 3. For trucks with Modular Mining System (MMS) or Scoreboard, the Option Code is "12". Option Code COMMUNICATION MODE 0 Stand Alone 10 PMC Mode (530M/HD1500 only) 12 Modular Mining Mode, Scoreboard and User Data Communication Mode