OM3212 08/11 Operator Cab and Controls - Section 32 Page 32-19 Tachometer Tachometer (13, Figure 32- 8) indicates 0-2500 rpm engine speed. Each bar represents 100 rpm. Engine Controller Monitor Engine control monitor (18, Figure 32- 8) flashes (red) whenever any abnor- mality occurs in any of the engine con- trol systems. Lock-up Pilot Lamp Automatic Transmission Mechatronics Monitor Lock-up pilot lamp (14, Figure 32-8) lights up (blue) whenever the torque converter is locked up and the trans- mission enters direct drive. This red indicator (19, Figure 32-8) flashes whenever any abnormality occurs in the mechatronics related parts of the transmission control sys- tem.
Other Mechatronics Monitor (Optional) Shift Limiter Pilot Lamp This red indicator (20, Figure 32-8) flashes whenever any abnormality occurs in the mechatronics related parts of the PMC (Powertrain Manage- ment Control) system, RCM (Retard Control Monitor) system, PLM (PayLoad Meter) sys- tem, and the suspension control system. Shift limiter pilot lamp (15, Figure 32-8) lights up (blue) whenever the shift lim- iter switch (on center console) is acti- vated. Shift Indicator Shift indicator (16, Figure 32-8) indicates the lever position of the transmission range selector.
Fuel Level Monitor This red indicator (21, Figure 32-8) flashes whenever the remaining fuel in the fuel tank falls below 150 liters (40 gal.). When this indicator flashes, check fuel level gauge (22) and/or add fuel to the truck fuel tank. Transmission Shift Position Pilot Lamp Transmission shift position pilot lamp (17, Figure 32-8) will indicate the specific gear range in which the transmission is actually operating; R, N, 1, 2, 3, 4, 5, 6, or 7.