BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — A/C system

A/C system 115 When the DUAL button is not lit, operate the right temperature knob to automatically enter the dual-zone control mode. When the DUAL button is lit, the A/C system enters the maximum cooling, heating, and front defrost modes, and the A/C system automatically enters the single-zone control mode. Dual remains ON. All the above A/C setting switches and knobs have corresponding touch the operation buttons on the large central control screen, and users can choose to use them according to their needs. In-vehicle Heating Cool down fast 1.

Turn the left and right temperature If you need maximum cooling, close all windows, press the "A/C" button, turn the mode knob to the head-blowing state, turn the left and right temperature knobs to the coldest point, and turn the air volume control knob to the 8th position. knobs -1-, -10- to above 24°C. 2. Press the air outlet mode switch -3- of the A/C to set the air outlet mode. It is recommended to use the foot-blowing mode. 3. Rotate the air volume and shutdown 2 knob -6- to set the air volume. In-vehicle cooling If the temperature inside the vehicle is very high when the engine is started, it will take a little time before the air conditioner is fully operational.

Before turning on the A/C, set the fan to the highest speed and open the window, which can circulate and exchange the air inside the vehicle in a short time, which is beneficial to quickly reduce the temperature inside the car. Attention 1. Rotate the air volume and shutdown knob -6- to set the air volume. 2. Turn the left and right temperature knobs -1-, -10- to below 24°C. 3. Press the A/C switch -9- to turn on the cooling function, and the work indicator light on the button will light up immediately. 4. Press the air outlet mode switch -3- of the A/C to set the air outlet mode. It is recommended to use the face-blowing mode.