BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Starting and Driving

Starting and Driving 159 When engaging the "R" gear, make sure that the vehicle has come to a complete stop. When shifting from "N" or "P" or "D" gear to "R", the brake pedal must be fully depressed, the unlocking button of the shift handle must be pressed, and the shift lever must be pushed forward to the first or second-order position be­ fore shifting to "R". When the gear is in "R", the "R" gear will be displayed on the instrument panel and the shift han­ dle, and the reversing light will automat­ ically light up.

"N" gear (neutral gear) When the vehicle is completely station­ ary and the engine needs to be idle for a short time (such as waiting for traffic lights), the "N" gear can be selected. When the gear is in the "n" position, "n" will be displayed on the instrument panel and the shift handle. If the trans­ mission is not locked, the parking brake must be applied or the brake pedal pressed. "D" gear (driving gear): Generally, this gear is used when the vehicle is driving forward, and "D" gear will be displayed on the instrument pan­ el and the shift handle. The system will automatically shift to the high gear or low gear according to the engine load and vehicle speed.

"M" gear (Manual transmission): Only when the current gear is "D", push the shift lever to the right to the manual mode position, and the automatic trans­ mission enters the "M" gear mode. At the same time, the current actual gear M will be displayed on the dashboard, and the "M" gear will be displayed on the shift handle. At this time, the shift lever can be pushed back and forth to manually add and subtract gears, and the corresponding actual gear will be displayed on the dashboard.

If the gear is in the "P", "R" and "N" gear, push the shift lever to the right to the manual mode position, and the au­ tomatic transmission will keep the origi­ nal gear at this time, and the whole ve­ hicle will display a prompt message on the dashboard and send out a prompt tone for pushing the shift lever to the left. If the automatic transmission is auto­ matically shifted into the "P" gear when the engine is turned off in the "M" gear, please be sure to push the shift lever to the left center position, if not, you will not be able to start the engine again.

At this time, a prompt message is dis­ played on the dashboard and a prompt tone is issued to prompt the shift lever to be pushed to the left. Driving operation: Press the brake pedal to the bottom, turn the gear of the vehicle to P/N gear, and start the engine. Press and hold the brake pedal, shift the vehicle into "D" gear, and enter the normal shift procedure. After engaging the gear, first release the electronic parking brake, then release the brake pedal, and slowly depress the accelerator pedal before the vehicle can start. When parking, depress the brake pedal, stop the vehicle, apply the park­ ing brake, and engage the vehicle in "P" gear. 3