Seat belt 015 Unfastened seat belt warning light is not fastened, reminding us of wearing the safety belt correctly at all times. Buckle up correctly seat belt slowly and smoothly to fit your body. The safety belt shall be pulled out after being fully retracted; if the safety belt cannot be pulled out of the retractor, you may first pull the safety belt with force and then loosen it; and, after that, you can pull the safety belt smoothly out of the retractor. 1 How to wear front seat belt? WARNING If the safety belt cannot be pulled out, it is necessary to send it to a BAIC franchised shop for overhauling as soon as possible under the condition that you pay more attention to safe driving.
Start /Stop the button in a ‘RUN ’mode and if the driver does not wear the safety belt, the safety belt indicator light will go on in the display screen of instrument infor mation center. If the driver does not wear the safety belt in the course of driving and drives his vehicle at a velocity of more than 25km/h or at a velocity of less than 25km/ h and when the driving distance is greater than 500 meters or the duration exceeds 60 seconds, the warning light will be lit and accompanied by an alarm sound.
The front panssenger seat has also been equipped with a warning that the safety belt Adjust the front seats and its headrests correctly, pull the safety belt out of the retractor, insert the latch socket of the safety belt into the lock catch and fasten the safety belt, and the latch socket will give a click when locked into the lock catch. The seat belt length will be automatically adjusted according to your body size and seat position. In case of emergency braking or collision, the tensioner will lock the safety belt. The retractor also locks up if you lean forward too quickly You can drag out the