BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Interior maintenance

Interior maintenance 201 Interior maintenance Cleaning and maintaining the instrument and plastic parts Objects with sharp edges (such as zip-fastener, rivets, etc.) may leave permanent scratches or scratches on the leather surface. Do not remove the seat belt to clean it. Do not clean the seat belts with chemical cleaning agents, because the chemical cleaning agents will damage their fabrics. Seat-belts shall not be in contact with corrosive liquid. Check the seat belt conditions reg­ ularly. If any damage to the fabrics belts, seat belt connections, seat belt retractors and locking parts is detected, go to the authorized deal­ er of BAIC for repair.

Attention Attention Clean the surfaces of the instrument and plastic parts with a clean soft cloth and fresh water. Otherwise, use the special solvent-free plastic cleaning agent. Never clean the instrument panel and the airbag module surface with solvent-containing detergent. The detergent containing solvent will penetrate the surface of the cleaned parts, resulting in fine pores on the surface and loosen­ ing of the parts. When the airbag inflates, this can significantly in­ crease the chances of damaging such loose plastic parts. Never treat the leather materials with solvents (such as gasoline, turpentine), floor waxes, shoe pol­ ish or the like.

Do not expose your vehicle to in­ tense sunlight for long periods of time to prevent leather or similar items from fading. If your vehicle needs to be parked outdoors for an extended period of time, be sure to cover the leather materials to pre­ vent them being exposed to sun­ light. WARNING It’s forbidden to clean the dashboard and airbag system with the compart­ ment spray and solvent detergent; oth­ erwise, the surface may get loose and the airbag may be triggered, resulting in serious injury to passengers. 4