BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Exterior maintenance

Exterior maintenance 205 to turn off the engine at this time. If you need to move the vehicle with the engine off, be sure to shift the transmission forced unlock to the "N" gear by the emergency unlock mechanism of the transmission "P" gear ("Emergency unlock of transmission "P" gear on page 162). After washing the vehicle, the emergency unlocking mechanism of "P" gear of the transmission should be released, and the transmission should be put into "P" gear before starting the engine. 6.

When you have washed and rinsed the For automatic transmission model I, if automatic vehicle washing de­ vice is used, the transmission must be put into "N" gear and the start/ stop button should be put in "OFF" mode before vehicle washing. For automatic transmission model II, if the automatic vehicle washing device is used, the transmission must be engaged in "N" gear, and care should be taken not to turn off the engine at this time. whole exterior, dry it with a soft towel or fur. Attention Check the body for road tar and other stains. Remove these stains with tar remover. Rinse it off immediately so it does not harm the finish. As you dry the vehicle, check it for chips and scratches.

If found, it should be re­ paired at the authorized dealer of BAIC Automatic vehicle washing device The vehicle paint has certain durability. Generally, cleaning the vehicle in the automatic vehicle washing equipment will not affect the vehicle paint condition. Impact on vehicle paint largely depends on the structure of vehicle washing device and the type of vehicle washing water filter, detergent and maintaining agent, etc.

If vehicle paint is not glossy and even has scratches after vehicle washing, point it out to operator of vehicle washing device immediately For automatic transmission model II, if the automatic vehicle washing device is used, the transmission must be engaged in "N" gear, and care should be taken not Manual cleaning of vehicles 1. Rinse the vehicle thoroughly with cool Use extra care to wash the vehicle with a high-pressure washer. Follow the instructions and requirements which come on with the high-pressure washer. Pay particular attention to the operating pressure and the spray rinsing distance. 4 water to remove loose dirt. 2.

Prepare a bucket of water and mix the water with special washing detergent. 3. Wash the vehicle, using a soft cloth, sponge or bristle brush. Start at the top and work your way down. Rinse frequently. 4. Finally, rinse the wheels, doorsills and others. When washing, replace the sponge or soft cloth. 5. After you finish scrubbing, rinse the vehicle thoroughly with a plenty of water.