Exterior maintenance 207 Polishing Vehicle paint damages Maintenance of chromium- plated parts Polishing is needed only when vehicle paint becomes dim and more gloss can not be reached by using waxing materials. If the used polishing agent does not contain preservative composition, vehicle must be waxed subsequently. Slight vehicle paint damages, such as scrapes, scratches or stone bruises should be covered by vehicle paint before rusting. If vehicle has been rusted already, thoroughly remove rust, Apply anti-corrosion primer and covering paint at the rusted position. These work should be carried out at the authorized dealer of BAIC.
Cleaning and maintaining the external plastic parts Chromium-plated parts can be cleaned with a damp cloth, and then polished with a soft dry cloth. If the results are not good enough, use the maintenance agents for chromium. The stain and dirt layer on the chromium- plated parts can be removed with the maintenance agents for chromium. Regular use of the maintenance agents for chromium can prevent the dirt layer from forming on the surface. When the maintenance agent for chromium is used, apply it onto the whole surface evenly and completely. Unpolished parts and plastic parts can not be treated with polishing agent or hard wax.
Attention In general, clean the external plastic parts with fresh water, soft cloth and bristle brush. If cleaning is needed further, use the recommended special solvent-free plastic cleaning agent. 4 Do not use solvent-containing cleaning materials when cleaning plastic parts, otherwise, it will easily cause damage to the plastic parts. Attention