BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Exterior maintenance

Exterior maintenance 209 Maintaining the sealing strips Cleaning and maintaining the wheels Replace the damaged blade in time. A new wiper blade surface is coat­ ed with a layer of graphite which can make the wiper blade to move smoothly without scratching noise. If the graphite layer is damaged, the wiping noise will rise, and re­ place the wiper in time. In winter or cold weather, check whether the wiper blades are fro­ zen against the windshield before operating them. If so, first deicing treatment, otherwise it will cause damage to the wiper blade and wip­ er motor.

Attention Frequent and appropriate protection of the rubber sealing strips for the doors, windows and other parts can maintain their flexibility and prolong their service life. This can also improve the leakproofness, allow the door to be opened easily and reduce the impact sound of closing the doors. At the same time, it is not easy to be frozen in winter. Regular maintenance of wheels can keep beautiful, and at the same time, anti-skid salt and braking wear debris on wheels should be removed regularly, which can keep the smoothness of wheel surface and prolong its service life. Maintenance operation: Regular operation 1.

Use a soft cloth to remove dust and dirt Every two weeks from the surface of the sealing strip. 2. Apply the special protective agent to the Remove the antiskid salt and wear debris from the wheels. Clean the wheels with acid-free detergent. 4 sealing strips regularly. Every three months Both sides of the front roof are de­ signed as drainage channels. There will be a small amount of water after rain. After the front door is opened, a small amount of water may pop into the vehicle. Attention Apply the high-quality hard wax to the alu­ minum alloy wheels.