Coolant 233 Coolant refilling Only add new coolant! After filling, the coolant level must be between the "MIN" mark and the "MAX" mark. It is suggested to fill the coolant when the engine is cold, but the coolant level shall not exceed the "MAX" mark, oth erwise the excessive coolant will over flow when the engine becomes hot. Attention Make sure the coolant level is at or be low the MAX mark. Attention If the coolant is needed to be added, only add new coolant. The coolant must be compliant with this manual. If a suitable coolant cannot be pur chased for the time being, other types of coolant shall not be added.
If neces sary, add pure water temporarily, but add coolant as soon as possible as required. Coolant expansion tank cover closed Install and tighten the expansion tank cover. 4 Tip When the engine is cold, the coolant level may exceed the MAX mark slight ly. If the coolant loss is large, the cold coolant can be added after the motor is cooled, otherwise the engine may be damaged. If too much coolant is consumed, it indicates that the system has leakage. At this moment, please in spect cooling system at the authorized dealer of BAIC to avoid damage of en gine.