Windshield washer fluid and wiper blades 244 If the wiper blade makes a friction sound, it may be caused by the following reasons: When washing the car in the automatic car washing equipment, hard wax res idue is consolidated on the windshield. Such hard wax residue can only be cleared away with dedicated detergent. This friction sound can be eliminated by adding windshield cleaner which can dissolve paraffin wax. Ordinary clean ing solution, which can only dissolve grease, cannot remove this deposit. If the wiper blade is damaged, it can also cause friction sound, so replace the wiper blade.
If the positioning angle of the wiper arm is incorrect, please go to the special dealer of BAIC to check and adjust the positioning angle. The wiper blade must be checked regularly and replaced as required, otherwise the front and rear windshield will be damaged. Replace the front wiper blade Lock button 4 Pull up the wiper arm and turn the wiper blade to the position shown in the figure in the direction of the - arrow -. Install a new wiper blade in the reverse order of removing the wiper blade. Pull up the wiper arm and turn the wiper blade to the position shown in the figure in the direction of the -arrow-.