Tire 252 Wheel balance Replacement of rim The tires were properly balanced by the factory. The balance of your tires is dependent on many factors which can cause wheel imbalance and front-wheel shimmy. You should timely treat and balance the unbalanced tires. Failure to do so can cause the steering system, suspension system and tires to wear out faster. The dynamic balance of wheels must also be recalibrated after replacing tires. Wheel dynamic balance standard: cumulative ≤ 10g. Incorrect Wheel Alignment Rims that are bent, cracked or severely rusted or corroded should be replaced. If the wheel nut is often loose, replace the wheel and wheel nut.
If the tire leaks, it should be replaced (except for some repairable aluminum wheels). In case of any of the above situations, repair should be carried out at the authorized dealer of BAIC. The authorized dealer of BAIC knows which kind of rim should be used. The load capacity, diameter, width, and eccentricity of the new rim should be the same as those of the original wheel, and the installation method should be the same. If you need to replace the rim, you should only use the original new accessories of BAIC to replace it, to ensure that the rim matches your vehicle.
It is very dangerous to use improper rims, which will affect the braking and handling performance of the vehicle, causing tire leakage, thus resulting in the vehicle out of control. It may cause an accident and cause injury to you or others. WARNING The use of rims with inconsistent spec ifications will also cause problems in bearing life, brake cooling, speedome ter or odometer calibration, headlight aiming, bumper height, vehicle ground clearance, and the clearance between tires or tire chains and the body and chassis. 4 Misalignment of wheel alignment will lead to uneven tire wear, thus reducing driving safety.
If uneven tire wear is found, wheel alignment inspection should be carried out at the authorized dealer of BAIC as soon as possible. It is also dangerous to replace the ve hicle with used rims. You can't know how old rims have been used and how many miles they have traveled, and they may suddenly break down and cause accidents. If you need to replace the rim, you must use the new original rim of BAIC.