BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 088 Replace Battery After pressing the unlock/lock contin­ uously, the door lock protection func­ tion will be triggered, and the unlock function will be temporarily disabled. Attention When the power of the remote key is insuf­ ficient, the trip computer display will display "low power of the smart remote key" to re­ mind you to replace the battery. When replacing the battery, it is necessary to open the battery cover on the key. If it is not operated properly, it is easy to damage the key. Therefore, it is recommended to entrust authorized dealer of BAI to replace it.

Make sure that the positive and negative poles of the remote con­ trol key battery are installed cor­ rectly. Do not replace the remote key bat­ tery with wet hands to avoid the battery from being rusted. Do not touch or move any parts in the remote key, otherwise it will af­ fect the function of the key. Be careful not to bend the elec­ trodes when inserting the remote key battery, and do not stick dust or oil in the battery box. Attention 2 When you operate the remote key, you do not need to aim the remote key at the vehicle, but the key must be within a certain range to function when you press the key.

Attention Please note that the operating range of the remote control key will be affected by the battery charge in the key, and sometimes it will also be affected by physical and geographical factors. For safety reasons, please operate remote­ ly when approaching the door. Please do not touch the circuit board, otherwise static electricity may be generated, thus damaging the remote key. Don't lose any parts when replac­ ing the battery of the key. Replace only with the same or equivalent type of battery recom­ mended by BAIC. Waste batteries must be disposed of according to local laws. WARNING