BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 091 Guard against theft and alarm system Remote control key setting anti-theft If the vehicle does not meet the locking conditions, that is, any door in each door and tailgate is not closed or the start/stop button is in the "RUN" position, the vehicle will not respond by pressing the locking button, and the vehicle cannot be locked and fortified at this time. Vehicle locking conditions: When all door locks and tailgate locks are normal, all doors and tailgate are closed normally; The one-button start switch is closed and the start/stop button is in the "OFF" position.

Your vehicle is equipped with an electronic anti-theft alarm system and in order to ensure maximum safety and convenience, we strongly recommend you to fully understand its characteristics and usage by carefully reading the contents of this chapter. 2 Press the lock button. If each door and tailgate is closed, the turn signal flashes once, and the door and tailgate are locked at the same time. The anti-theft status indicator in the instrument information center starts to flash, indicating that the system has entered the anti-theft alert state.

In this state, the anti-theft system will monitor the state that each door, tailgate, one-button start switch and start/stop button are in the "RUN" position. If the lock button is pressed again at this time, the turn signal light flashes once, and the system executes the lock action again.