Industrial — APPENDIX P — INPUT/OUTPUT FUNCTIONS

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL A. SECONDARY SHIFT SCHEDULE USES: Provides operator selection of dual shift schedules. Can be used for performance/economy, loaded/empty, or other shift schedule combinations. VARIABLES TO SPECIFY: None VOCATIONS: Various WIRE 153 OR WIRE 177 SECONDARY SHIFT SCHEDULE V-12 DASH SWITCH Open: PRIMARY (usually “PERFORMANCE”) Closed: SECONDARY (usually “ECONOMY”) V V-31 WIRE 161 SIGNAL RETURN OPTIONAL CUSTOMER-FURNISHED VIW CONNECTOR(S) ECU This function may be activated by either the “MODE” button or by the external circuit. NOTE: The shift schedule identified as “secondary” is activated when the switch is closed or the MODE button is selected.

SELECT S R MODE If this function is on the MODE button, the primary mode will always be selected when the ECU is powered up. For Shift Selector wiring requirements, see installation drawing AS07-27 (see SA2978 WTEC III Controls and General Information) N D If this function is controlled by a dash switch, the selection of primary/secondary mode is determined, at all times, by the position of the dash switch. V04856.01 Figure P–1. Secondary Shift Schedule Copyright © 2001 General Motors Corp. APPENDIX P — INPUT/OUTPUT FUNCTIONS The schematics which fol schematics provide detail overview of Input/Output WARNING!

low were taken from the Sales Tech Data Book entitled “WTEC III Controls.” These infTohrmesaeti oscnh neemedaetdic tso s choorwre ctthlye pinetrfeonrdme din upuset aonfd t hoeu tsppuet cfiufinecdti ocno ncotrnonlesc fteioantus.r Feos rw ahn ich Fuhnacvtieo nbse, ernef evra tloid Saetcetdio inn 7 t hofe tchoisn mfigaunuraalt.ion shown. Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING These schematics show the intended use of the specified controls features which OR UNINTENDED USE OF THESE FEATURES.

have been validated in the configuration shown. Any miswiring or use of these WARNING! features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES.