WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL AH. KICKDOWN USES: Provides both economy and performance shift points at full throttle. Operator changes from economy to performance by stepping through a detent at the throttle pedal. VARIABLES TO SPECIFY: None VOCATIONS: Various OPTIONAL CUSTOMER-FURNISHED VIW CONNECTOR(S) CLOSED THROTTLE FULL THROTTLE ECONOMY SHIFT POINTS ENGINE OPERATING RANGE V-14 V V-31 FULL THROTTLE KICKDOWN SHIFT POINTS THROTTLE PEDAL Pedal movement beyond this point must not change engine fuel setting or transmission throttle position ECU MOMENTARY SWITCH WIRE 177 KICKDOWN S NOTE:
“Full throttle economy shift points” position on the pedal should coincide with full stroke of the Allison throttle position sensor (if used) and/or “full fuel” setting of the engine controls. Thus, pedal movement beyond “full throttle economy shift points” must not change fuel setting of the engine or the throttle position signal to the transmission controls system. WIRE 161 SIGNAL RETURN V04882 Figure P–33. Kickdown P–34 Copyright © 2001 General Motors Corp. APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown.
Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES.