WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL K. LOCKUP INDICATOR USES: Turn on dash indicator when transmission lockup clutch is engaged. Used to indicate when maximum engine braking is available. VARIABLES TO SPECIFY: None VOCATIONS: Various OPTIONAL CUSTOMER-FURNISHED VIW CONNECTOR(S) V SWITCHED POWER Contacts close when torque converter lockup clutch is applied in the transmission. V-3 E2 NC ECU WIRE 132 LOCKUP INDICATOR B1 COM NO E3 SWITCHED POWER VIM S Relay shown de-energized V07176 Figure P–55. Lockup Indicator P–60 Copyright © 2001 General Motors Corp. APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING!
These schematics show the intended use of the specified controls features which have been validated in the configuration shown. Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES. TRANSM LOC ISSION KUP