WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL Q. RETARDER INDICATOR USES: Signals that the retarder is active. Typically used to turn on the vehicle brake lights when the retarder is in use. VARIABLES TO SPECIFY: None VOCATIONS: Various This function is used in conjunction with Input Function “Z”, Retarder Enable. Refer to schematic for Input Function “Z”, noting the use of wire 125. Copyright © 2001 General Motors Corp. P–63 APPENDIX P — INPUT/OUTPUT FUNCTIONS WARNING! These schematics show the intended use of the specified controls features which have been validated in the configuration shown.
Any miswiring or use of these features which differs from that shown could result in damage to equipment or property, personal injury, or loss of life. ALLISON TRANSMISSION IS NOT LIABLE FOR THE CONSEQUENCES ASSOCIATED WITH MISWIRING OR UNINTENDED USE OF THESE FEATURES.