Industrial — CODE 26 XX — THROTTLE SOURCE/ENGINE COOLANT SOURCE NOT DETECTED

WTEC III ELECTRONIC CONTROLS TROUBLESHOOTING MANUAL CODE 26 XX — THROTTLE SOURCE/ENGINE COOLANT SOURCE NOT DETECTED Main code 26 occurs when the ECU has not detected either a throttle source or an engine coolant source. This is a new code related to the autodetect feature which is described in Paragraphs 1–9 or 1–10. Code 26 00 means that the ECU has not detected the presence of engine throttle data or analog circuitry. For details about autodetect or using ATDT TM or Pro-Link ® to select a throttle source, see Paragraphs 1–9 or 1–10 and the ATDT User Guide (GN3433EN) or the WTEC III Pro-Link ® Manual.

Code 26 11 means that the ECU has not detected the presence of engine coolant temperature data or analog circuitry. For details about autodetect or using ATDT TM or Pro-Link ® to select an engine coolant temperature source, see Paragraphs 1–9 or 1–10 and the ATDT User Guide (GN3433EN) or the WTEC III Pro-Link ® Manual. A. Active Indicator Clearing Procedure Power down Manual B. Troubleshooting 1. When code 26 00 is logged and an analog TPS is known to be installed, refer to code 21 XX for troubleshooting steps. If a J1587 or J1939 throttle signal is used, refer to code 66 00 for trouble- shooting steps. 2.

When code 26 11 is logged and if an analog engine coolant temperature sensor is being used, refer to code 62 XX for troubleshooting steps. If a J1587 or J1939 engine coolant temperature signal is being used, refer to code 66 00 for troubleshooting steps. Copyright © 2001 General Motors Corp. 6–47 Main Code Subcode Meaning 26 00 Throttle source not detected 26 11 Engine coolant source not detected