. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING CHANGE OIL IN DIFFERENTIAL CASE WARNING 4 - 80 The parts and oil ar e at high te mperature a fter the engine is stopped, and may cause serious burns. Wait for the temperature to go dow n before s tarting the operation. If there is still press ure remaini ng inside th e case, the oil or p lug may fly out. Turn the plug slowly to re lease the pressure, then remove it carefully. Refill ca pacity: Le ft, right 1 3 liters (3.4 3 US gal 1. Stop th e machin e so that c asting line (1) is horizonta l and drain plug (P ) is at the 2. Remov again. 3. Add oil through t he hole f or plug (G) to the specifie d level 4.
After a dding oil, check tha t the oil is at the specified level. See "CHEC K OIL L 4-49)". EVEL IN FINAL DRIVE CASE, ADD OIL RIVE ADD (PAGE The parts and oil ar e at high te mperature a fter the engine is stopped, and may cause serious burns. Wait for the temperature to go dow n before s tarting the operation. If there is still press ure remaini ng inside th e case, the oil or p lug may fly out. Turn the plug slowly to re lease the pressure, then remove it carefully. Refill ca pacity: 45 liters (11 .88 US ga 1. Remov e drain plug (P), drain the oil, then tighten the plug through the hole for plug (G) to the specified level. plug again. 2.
Add oil through t he hole f or plug (G) to the specifie d level 3. After a dding oil, check tha t the oil is at the specified level. See "CHEC K OIL L EVEL IN DIFFERENTIAL CASE, ADD OIL ADD (PAGE 4-49)".