. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. or leakage of oil from 3 - 73 WALK-AROUND CHECK Before starting the engine, walk around the machine and look at the underside of chassis fo r anythin g unusual l ike loose bolts and nuts, leakage of fuel, o hydraulic system. il and coolant. Also check the condition of the work equipment and the ollection of dust at places that reach high temperature.
the Also check for loose wiring, play, and c ollection of dust at places that reach high temperatu Leakage of oil or fuel, or accumulation of flammable material around high temperature parts, such as the e ngine muffle r or turbocharger, may cause fire. Check carefully, and if any abnormality is found, repair it or contact your Komatsu distributor. Do not get on or off the machine from the rear. Using this position is dangerous because it is easy to slip an d you c annot be seen from the operator's compartment. Al ways use the handrail and step at the side when getting o n or off t he machine. If the machine is at an angle, make it le vel before checking.
the machine and under the machine to check for loose nut or bolts, or Before starting the engine, look around bolts, leakage of oil, fuel, or coolant, and chec k the condition of the work equipment and hydraulic system. Check also for loose wiring, play, and collection of dus t at places which reach high temperatures. n before starting the engine each day. Always carry out the items in this sectio 1. Check for damage, wear, play in wo rk equipment, cylinders, linkage, hoses Check for cracks, excessive wear, p found, repair it. lay in wotk equipment, cylinders, linkage, and hose s. If any abnormalit y is 2.
Remove dirt and debris from aroun d the engine, battery, and radiator Check for dirt accumulated around t grass, etc.) accumulated around th parts. If any dirt or flammable mater For the method of removing dirt from FINS, AFTERCOOLER FINS (PAG he engine or radiator. Also check for flammable mat erial (dry leave s, twigs, e battery, engine muffler, turbocharger, or other high temperature engine ials are found, remove them. the radiator, see "CLEAN AND CHECK RADIATO R FINS, OIL C OOLER E 4-37)". 3. Check for coolant and oil leakage a round the engine Check for oil leakage from the engi repair it. ne and coolant leaks from the cooling system.
If any abnormality is found, y abnormality i s found, 5. Check for leakage of oil from power train case,final drive case,hydraulic tank,hose,joint s Check that there is no oil leakage.If Check for leakage of oil from the un any abnormality is found,repair the place where th e oil is le aking. dercover.Check the ground for traces of oil leakage . 6. Check the undercarriage (track, sp rollers If any damage, wear, or oil leakage rocket, idler, guard) for damage, wear, loose bolts, is found, repair the problem and tighten the bolts.