. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 1. Open the side cover on the left side of the machine, then remove cap (2) tank is between the FULL and LOW marks. If the water level is low, add water as follows. NOTICE or any 3 - 76 Normally, do not op en the radiator cap. When check ing the cool ant level, check the sub-tank when Do not remove the c ap when the radiator coolant is hot. Boiling coolant may spurt out. After the coolant temperature goes lowly to release the pressure, th en remove i and check that the water lev el in the re serve 2. In refilling, fill with water through cap (1).
Chec k that the c oolant level is higher tha the same time, fi n the strainer bottom as illus trated at rig ht. At ll reserve tank (2) with coola nt to the ful l. 3. To refill the radia tor, first stop the engine and pour coolan t until it reaches the to after idling for 5 m if necessary. p of the filler opening. Then start the e ngine, inutes recheck the coolant l evel, add c oolant 4. After adding coo lant, tighten the cap securely 5. If the volume of possible cooling Do not rely solely on the monitor for checking the coolant level. When diluting coolant, use distilled water or tap water ( soft water). Do not use natural wat other unprocessed wat