Komatsu — ADJUSTING POSTURE OF WORK EQUIPMENT

. OPERATION OPERATION SHIM ADJUSTMENT (In case of Sigmadozer) (0.04 in). 3 - 139 Adjust with shims so that the play in the axial direction (direction of the arrow) at the ball joints ( 3 places) is withi n 1 mm (0.039 i n). 1. Remov e shim (1) and tig hten bolts (2 ) to e liminate the bal l joint play. e clearance "A" and remove bolts (2). him (1) having its thickness of "A" mm to "A + 1" mm to "A + 0.04" in) in place with bolts 2. 2. Measur e clearance "A" and remove bolts (2). 3. Install s him (1 ) having it s thickness of "A" mm to "A + 1" mm ("A" in. to "A + 0.04" in) in place with bolt s 2. 4. Confirm that b all joint ca n move smoothly after tightening bolts.

SHIM ADJUSTMENT (In case of Semi U-dozer, U-dozer ) Adjust the t the axial di hickness of shim rection (shown b so that y the a the rrow ball jo ) doe int s n play (4 places) in ot exceed 1 mm 1. Remov e shim (1) and tig hten bolts (2 ) to e liminate the bal l joint play. e clearance "A" and remove bolts (2). him (1) having its thickness of "A" mm to "A + 1" mm to "A + 0.04" in) in place with bolts 2. 2. Measur e clearance "A" and remove bolts (2). 3. Install s him (1 ) having it s thickness of "A" mm to "A + 1" mm ("A" in. to "A + 0.04" in) in place with bolt s 2. 4. Confirm that b all joint ca n move smoothly after tightening bolts.