Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING the booster cable connections. 3 - 157 Whe n connecting the cables, never cont (-) te rminals. Whe n starting the engine with a booster rubb er gloves. Be c areful not to let the normal machin each other. This prevents sparks from g coul d ignite the hydrogen gas given off Make sure that there is no mistake in The f inal connection is to the engine blo spar ks will be generated when this is do as p ossible from the battery. Whe n disconnecting the booster cable, in co ntact with each other or with the m NOTICE size of the booster cable and clip should be suitable for the battery size.

battery of the normal machine must be the same capacity as that of the engine to be started. k the cables and clips for damage or corrosion. sure that the cables and clips are firmly connected. The size of the booster cable and clip s hould be suitable for the battery size The battery of the normal machine mus t be the same capacity as that of the engine to be started. Chec k the c ables and clips for damage Make sure t hat the cables and clips are Chec k that the work equipment lock lev ers and parking brake levers of both machines are in the LOCK position Chec k that each lever is in the NEUTRA L position. CONNECTING THE BOOSTER CABLE S l machine and problem machine in the OFF position.

in the order of the numbers marked in the diagram. A) to the positive (+) terminal hine. of booster cable (A) to the on the normal machine. B) to the negative (-) terminal ine. f booster cable (B) to engine . Keep t he starting switch of the norma l machine and problem machine in t he OFF position Conne ct the booster cable as follows, in the order of the numbers marked in the diagram. 1. Connect the clip of booster cable ( of battery (C) on the problem mac 2. Connect the clip at the other end positive (+) terminal of battery (D) 3. Connect the clip of booster cable ( of battery (D) on the normal mach 4. Connect the clip at the other end o block (E) on the problem machine 1.

Co nnect the clip of booster cable ( batter y (C) on the problem mac 2. Co nnect the clip at the other end sitive ( +) terminal of battery (D) 3. Co nnect the clip of booster cable ( batter y (D) on the normal mach 4. Co nnect the clip at the other end o ck (E) on the problem machine