. OPERATION TROUBLESHOOTING appears on the display panel B (multi-information), take appropriate remedies based upon the table below. 3 - 160 MONITOR PANE When an error code Abnormality code Abnormality Method of displaying abnormality Remedy E01 Abnormality code and The autom service hour are some funct displayed in turn on possible to service meter portion Please con distributor i atic functions stop and ions stop, but it is still carry out operations. tact your Komatsu mmediately for repairs.
E02 Abnormality code and If user stop service hour are starts again displayed in turn on possible wi service meter portion, However, u caution lamp flashes, Please con buzzer sounds distributor i s engine and then , operations are thout limit functions. ser must be careful. tact your Komatsu mmediately for repairs.
E03+CALL Number of speed ranges that can be used is limited Engine does not run at full speed Excessive shock when shifting gear Turning ability becomes poor Excessive braking shock Abnormal engine coolant temperature sensor Abnormality code and Move mach service hour are then contac displayed in turn on distributor i service meter portion, caution lamp flashes, buzzer sounds ine to a safe place, t your Komatsu mmediately for repairs. E04+CALL Abnormality code and Stop machi service hour are Komatsu di displayed in turn on for repairs. service meter portion, caution lamp flashes, buzzer sounds ne, then contact your stributor immediately