. MAINTENANCE OUTLINES OF SERVICE to Measurement of quantity of particles This uses a PQI (Particle Quantifier Index) measurer to measure the quantity of iron particles of 5 µ m or more, enabling early detection of failures. 4 - 7 GREASE seizure and noises at the joints. nt is used under heavy-duty conditions. Always use the recommended grease and Grease is used to prevent This construction equipme nt is used under heavy-duty condition follow the change interval Manual. s and recommended ambient temperatures given in this Operat ion and Maintenance The nipples not included in the MAINTENANCE section are n ipple s used when overhauling , so they do not need grease.
If any part becomes stiff o r generates noise after being used for a long time, grease it. ld grease that is pushed out when greasing. r generates noise after being used for Always wipe off all of the o ld grease that is pushed out whe Be particularly careful to w wear of the rotating parts. ipe off the old grease in places where sand or dirt sticking in the grease would cause CARRYING OUT KOWA (Komatsu Oil Wear Analysis) The oil clinic samples the oil p eriodically and analyzes it. This i s a pr eventive maintenance se rvice, which provides early discovery of abnormal p arts and wear of the drive parts of the m achine.
This then make s it possible to ensure prevention of failures and red uction in downtime. Komatsu's long years of exp erience and rich supply of accumulated data make it possible to accurately determine the condition of your machine . This enables us to locate the problem s and to recommend suit able and timely repair methods. The oil clinic charges the cu stomer only the actual costs, and provides an immediate report of the results of the analysis and recommendatio nsfor action to take. This low-cost servi ce can save you high cos ts and inconvenience in the future, so we strongly r ecommend you to avail yourself o f this service.
KOWA ANALYSIS ITEMS rticles tively Coupled Plasma) analyzer Analysis of metal wear pa This uses an ICP (Induc measure the density of me tal wear particles in the oil. Others Measurements are made fuel in the oil, and dynami of items such as the ratio of water in th e oil, density of the antifr eeze coolant, ratio of c viscosity, enabling a highly precise di agnosis of the machine's health.