. MAINTENANCE SERVICE PROCEDURE 2. Remove 6 holders (2), then remove cover(3). 4 - 28 REPLACING ELEME 1. Open the left e ngine side co 3. Hold t he outer element (4), move it carefully u p and do wn and to the left and r ight, and rota te the element to t he left an d right while pulling it out. 4. Use a brush or cloth to remo ve all the dirt stuck to cover (3) and the ins ide of ai r cleaner bod NOTICE The inne r element must not be c leaned and us ed ag ain. When replacing the outer ele ment, replace the inne r element at the same tim e.
If the inn er elemen t is not installe d properly and the ou ter elemen t and cov er areinstalled , there is danger that th e outer element will be d amaged. The seal portion o n imitation par ts lacks precision, an d allows t he entry o f dust, which leads to damage of the engine. Do not use such imitation parts. 5. Remo ve inner 6. eleme Push secure Push with y our hand If you hold the element and move it carefully u p and do wn and to the left and right, it is eas ier to insert t he ele ment. 7. Repla ce O-rin g (7) for cove r (3) with new one.