. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL PRE-FILTER CARTRIDGE WARNING any damage is found, replace it with a new one. 4 - 62 After the engine has be en operated, all parts are a t high t emperature, s o do not replace the filter immediately. Wait for all parts to cool down before st High pressure is gener ated inside the engine fue l piping system whe When replacing the filt er, wait for at least 30 seconds a fter stopping the engine to let the inte rnal pressure go down before replacing the filter. Do not bring any fire o Be careful when openi ng the air bleed plug in the fuel fi lter head.
It is still under pressure, so NOTICE Genuine Komatsu fuel filter cartridges use a special filt er that has hi ghly efficient filtering ab ility. When replacing the filter cartridge, always use a genuine Komatsu part. The common rail fuel i njection system used on t his ma chine consist s of more precise parts t han the conventional injection pump and nozzle. If any part other than a genuine Komatsu filter cartridge is used, dust or dirt may get in and cau se problems with the injection system. Always avoid using substitute parts. When carrying out insp ection or maintenance of the fue l system, pay more attention than norm al to the entry of dirt.
If dirt is stuck to any part, use f uel to wash it off completely. Container to catch th Prepare a filter wren 1. Close the fuel valv 2. Set a container un oil. 3. Remove water sep e. der the fuel pre-filter cartridge to catch th arator (1) to inspect, using a filter wrench.