Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT, CLEAN HYDRAULIC TANK STRAINER WARNING 1. Lower the blade and ripper on the ground securely, engine and slowly turn the cap of oil filler (F) to release the internal pressure. Then, remove the cap. element. 4 - 73 EVERY 2000 HOURS SERVICE Maintenance for every 250, 500 and 1000 hour s service s hould be carried out at the same t The oil is at hig h temperature immediat ely after the machine h as been operated. Wait for the oil to coo l down before changing the oil. When removing the oil filler cap (F), tur n it slowly t o release th e internal pressure, then remove it car Refill capacity :

130 liters (34.35 US stop the 2. the drain valve ( 2). After draining the oil, tighten drain plug (1) and drain valve ( 2). When loosening d rain valve (1), b e careful not to get oil on 3. Remove bol element. Clean the in ts (3), then remove cover (4) and take out the side of case and removed parts and install a new take out the 4.