. MAINTENANCE SERVICE PROCEDURE CHECK PIVOT BEARING OIL LEVEL, ADD OIL When removing plug (1), be careful not to let dirt or dust get it. (B): 25mm (1inch) CHECK OIL LEVEL IN RECOIL SPRING, ASSIST CYLINDER CASE, ADD OIL in. 2. Loosen the plug and confirm that the internal pressure is released. 4 - 78 Remov When r e plug (1). emoving p 2. Check that the oi l is up to oil level (2) i n the diagram.
If the oi l level is l ow, add oil through th e hole for plug (1) Remov When r e bolts (1) emoving t , then re he cover move cover ( , be careful n Insert a sca le and ch eck that t he oil level is 70 to 80 mm (2.8 to 3.2 in If ) from the the oil is i bottom e nsufficien dge of th t, add oil e inspection port. .