Doors 72 72–01 Door Seal, Door Latch, and Door Check Lubrication NOTICE Do not lubricate the door hinges. Lubrication could adversely affect the performance of the hinge bushings. NOTE: Light penetrating oils, such as WD–40, should not be used because they wash out ben- eficial factory-installed grease, and they evapo- rate. Door Seals Lightly coat the door seals with a lubricant that is safe for rubber. Door Latches Wipe old grease and dirt from all door latch assem- blies, then apply liberal amounts of an approved grease to each moving joint; see Table 1 . Use an appropriate applicator that will not leave material behind. Door Checks Wipe old grease and dirt from door checks.
Lubricate each moving joint of the door checks at installation and every six months thereafter, with an approved grease; see Table 1 . Use an appropriate applicator that will not leave material behind. Application Lubricant NLGI Grade Approved Grease Door Latches ConocoPhillips Triton® 460 1.5 Door Checks ConocoPhillips Megaplex® XD3 2 Table 1, Approved Grease 122SD and Coronado 132 Maintenance Manual, January 2010 72/1