OPERATION OPERATION 2. Operate steering, directional and gear shift lever(4) to the desired position, and check that speed range display lamp(3) shows the correct position. 3. Set safety lock lever(6) for blade control lever(5) to the FREE position. 4. Put blade control lever(5) in the RAISE position to raise the blade 40 to 50mm (1.6 to 2.0in) off the ground. 5. Move steering, direction and gear shift lever(4) to the F (forward) or R (reverse) position to move the machine off. 6. Pull fuel control lever(7) to increase engine speed. 3-65