Komatsu — PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS

MAINTENANCE USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE REMARK G When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic maintenance hours described in this manual. Change oil according to the following table if fuel suiphur content is above 0.5%. G When starting the engine in an atmosphric temterature of lower than 0єC (32єF), be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though an atmospheric temparature gose up to 10єC (50єF) more or less in the day time. Use CE or CF class oil for the engine oil. G Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half.

G There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil than matches the temparature in the table. G We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydrauric work equipment applications. Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API:

American Petroleum Insitute 4-11 Fuel sulphur content Charge interval of oil in engine oil pan 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval