Komatsu — CHECK LEVEL OF BATTERY ELECTROLYTE

MAINTENANCE SERVICE PROCEDURE CHECK LEVEL OF BATTERY ELECTROLYTE G Since the battery produces combustible gas and can explode, do not bring fire near it. G Battery fluid is a dangerous substance. Take care that it does not get in your eyes or on skin. If it does, wash it away with a large quantity of water, then see a doctor. G Do not use or charge the battery when its fluid level is below the LOWER LEVEL. If it is used or charged as it is, it may explode. Be sure to check the battery fluid level periodically and add distilled water to the UPPER LEVEL, as required. Carry out this check before operating the machine. 1. Open the battery cover on the left side of the machine body. 2.

Remove cap (1), and check if the battery electrolyte is up to the UPPER LEVEL line. If the level is low, add distilled water. Do not add water above the UPPER LEVEL line. This may cause the electrolyte to leak, which may cause fire or injury. If the electrolyte has spilled, add dilute sulfuric acid. 3. Clean the air hole in the battery cap (3), then tighten the cap securely. Wipe the top surface of the battery with a damp cloth to keep it clean. NOTICE When adding distilled water in cold weather, add it before starting operations in the morning to prevent the electrolyte from freezing. 4-45 WARNING