Komatsu — GREASE UNIVERSAL JOINT

MAINTENANCE SERVICE PROCEDURE GREASE UNIVERSAL JOINT The undercover is heavy. Never try to open or close the cover when directly beneath it. When removing bolts(2), carry out the work from the rear below the cover so that you can easily get out of the way. Apply grease to the grease fittings (2 places) shown by arrows. Remove the undercover at the rear bottom of the chassis as follows. 1. Remove 2 bolts(1) at the front of the machine. 2. Support the cover with your elbow while gradually remov- ing 2 bolts(2) at the rear of the machine. 3. Lower the cover gradually to open it. Weight of undercover: 21kg (46lb) 4. Apply grease to the grease fittings (2 places) shown by arrows. 4-55 WARNING