Komatsu — INSPECTION AND ADJUSTMENT BEFORE STARTING ENGINE

HANDLING TOWING WINCH ATTACHMENTS, OPTIONS INSPECTION AND ADJUSTMENT BEFORE STARTING ENGINE WALK-AROUND CHECK 1. Check wire rope If any abnormality is found, replace the wire rope. OPERATIONS AND CHECKS BEFORE STARTING ENGINE Before starting the engine, check the position of every lever. G Check that winch lever (1) is at the N position. G Check that safety lock lever (for winch) (2) is at the LOCK position. OPERATION The over-winding method is used with the towing winch: the wire rope is wound in and out from the top of the drum. 1. After starting the engine, set the safety lock lever (for winch) to the FREE position and release the winch con- trol lever from the LOCK position. 6-12