HANDLING TOWING WINCH ATTACHMENTS, OPTIONS EVERY 1000 HOURS SERVICE CHANGE GEAR CASE OIL AND CLEAN STRAINER The oil is at high temperature after the machine has been operated. Always wait for the temperature to go down before starting this operation. Prepare the following. G Container to catch drained oil: Min. 76 liters (20.06 US gal) capacity G Refill capacity: 76 liters (20.06 US gal) 1. Set the container to catch the oil immediately under drain plug (P). 2. Loosen drain plug (P), drain the oil, then tighten drain plug (P) again. 3. Remove strainer cover (H), then take out strainer (J) and case (K) and clean them.
NOTICE After washing the strainer with flushing oil, blow it with compressed air to completely remove all the dirt. 4. Install strainer (J), case (K), and strainer cover (H), then add engine oil through oil filler (F). NOTICE Use oil to match the ambient temperature. More than 0 ° C( 32°F ): Engine oil CD Class SAE30W Less than 0 ° C( 32°F ): Engine oil CD Class SAE10W 6-18 WARNING