OPERATION EXPLANATION OF COMPONENTS STARTING SWITCH This switch(4) is used to start the engine. OFF position: At this position, the starting switch key can be inserted and removed. When the switch is turned to this position, all the electric circuits are turned off and the engine stops. ON position: In this position, electric current flows in the charging and lamp circuits. Keep the starting switch key at the ON position while the engine is running. START position: This is the position to start the engine. Hold the key at this position while cranking. Release the key immediately after the engine has been started. The key will return to ON position when released.
HORN SWITCH The horn sounds when the button(5) at the rear of the blade control lever at the right side of the operator’s seat is pressed. CIGARETTE LIGHTER (Machine equipped with cab) This lighter(6) is used to light cigarettes. When the cigarette lighter is pushed in, it will return to its origi- nal position after a few seconds, so take it out to light your cig- arette. If the cigarette lighter is removed, the socket can be used as a power source. NOTICE This cigarette lighter is 24V. Do not use it as the power source for 12 V equipment.If it is used so, the equipment may be broken. The capacity of the cigarette lighter is 120W (24V x 5A). 3-11