OPERATION EXPLANATION OF COMPONENTS POWER TILTDOZER This lever(7) is used to lift or tilt the blade. G Lifting control (a)RAISE: (b)HOLD: Blade is stopped and held in this position. (c)LOWER: (d)FLOAT: Blade will move freely according to external force. REMARK G When released from FLOAT position, this lever will not return to HOLD position, so it must be moved back by hand. G If the engine is stopped when the lever is at the FLOAT position, the control lever will automatically return to the HOLD position. G Before starting the engine, check that the blade control lever is at the HOLD position.
G In cold weather, it will take time for the lever to be held at the HOLD position, so hold the lever by hand at the HOLD position for at least 1 second. G Tilting control (e)LEFT TILT (f)RIGHT TILT Tilting distance of power tiltdozer (center of blade edge) 3-21 Condition of blade Tilting distance D61PX D61EX Right tilt 440mm (15.8in) 500mm (19.7in) Left tilt 420mm (16.5in) 440mm (17.3in)