Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

OPERATION OPERATION CHECK FUEL LEVEL, ADD FUEL When supplying fuel, take care not to spill it. It can catch fire. Wipe off any spilt fuel. If fuel has spilt over soil or sand, remove that soil or sand together. Fuel is highly flammable and dangerous. Do not bring fire near fuel. 1. Turn the engine starting switch to the ON position and check the fuel level with fuel level gauge(G) on the moni- tor panel. After checking, turn the switch back to the OFF position. 2. After completing work, fill the fuel tank through oil filler port(F). 3. If fuel filler cap(F) is opened, float gauge(G) rises to the fuel level. Check that the fuel tank is full.

Check the fuel level visually and with float gauge(G). 4. If the fuel tank is not full, supply fuel through the fuel filler until float gauge(G) rises to the maximum position. Fuel capacity: 315 liters (83.16US gal) Height of tip of float gauge(G) when fuel tank is full: Approx. 130mm (5.1in) above top of fuel tank 5. After supplying fuel, push down float gauge(G) straight with fuel filler cap(F) and tighten fuel filler cap(F) securely, taking care not to catch float gauge(G) in claw(2) of fuel filler cap(F). REMARK If breather hole (1) on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. 3-43 WARNING