OPERATION OPERATION CHECK DUST INDICATOR 1. Open the engine side cover on the left side of the chas- sis, and check that the red piston has not appeared in the transparent portion of dust indicator(1). 2. If the red piston has appeared, clean or replace the ele- ment immediately. For details of the method of cleaning the element, see "CHECK, CLEAN AND REPLACE AIR CLEANER ELE- MENT (PAGE 4-19)". 3. After checking, cleaning, and replacing, press the knob of dust indicator(1) to return the red piston to its original position.
CHECK THAT LAMPS LIGHTS UP Check that the head lamp, rear lamp, additional working lamp (if equipped), and instrument lamp light up normally and they are free from stain and damage. 1. Insert the key into starting switch and turn the key to the ON position. 2. Turn the head lamp switch, the rear lamp switch and the additional working lamp to the ON position and check that the head lamps and rear lamps light up. If the lamps do not light up, there is probably a broken bulb or disconnection in the wiring, so contact your Komatsu distributor for repairs. 3-46