MAN — Valve clearance:

153 Checking and setting values Valve train The checking values are valid for all engines listed in this publication Valve clearance: (when engine is cold) Inlet 0.50 mm Exhaust 0.60 mm Valve clearance: The individual valve train components expand slightly as they warm up. Valve clearance ensures that the valves close reliably and that an effective seal is formed even when the engine is warm. Valve clearance too small: The valves do not sit correctly on the valve seat inserts when closed and are therefore no longer able to conduct the heat to the cylinder head.

In this situation the exhaust valves in particular are prone to burning because of the high thermal stress to which they are exposed as a result of the hot combustion gases which are constantly flowing past them. Valve clearance too large: The valve opening cross−sections are reduced and cylinder charging is impaired. Valve train wear and valve noise is greatly increased.

1 TDC 2 3 Valve timing 1 = direction of engine rotation 2 = intake valve opens 23° before TDC 3 = exhaust valve closes 30° after TDC 4 = exhaust valve opens 60° before BDC 5 = intake valve closes 37° after BDC 6 7 6 = exhaust valve open for 270° 7 = intake valve open for 240° The degrees specified refer to the crankshaft angle 4 5 BDC