161 Service data Dimensions Limit values Conrods Ø A 0.02 dia. A 1 8 mm 8 mm 2 A B 3 50.055−50.065 mm Conrods which are discoloured at the big end must not be re-installed. Bearing bore in measuring directions 1, 2 and 3 and in measuring planes a and b: 90.044−90.086 mm Edge condition: New conrod bearing in place, conrod assembled Conrod bearings Standard size: 2.468−2.478 mm undersize −0.25: 2.593−2.603 mm undersize −0.50: 2.718−2.728 mm undersize −0.75: 2.843−2.853 mm undersize −1.00: 2.968−2.978 mm Spread: 0.6−1.5 mm If signs of wear are present (scores, anti−wear coating damaged), re- place both bearing shells. Important:
Note installation position (upper half bearing shell has red mark on the side) Connecting rod bolts Length With each tightening, the bolts are deliberately stressed beyond the stretch limit and each tightening thus extends their length permanently. Torx bolt M14x1.5