Removing and installing fuel injectors Fig. 7 Extractor tube for injector nozzles (special tools, see item. 15.1, page 187). 1 2 3 А Knurled nut Б Extractor with slit for the passage of the cable for the needle movement sensor В Bridge 7 Fig. 8 Thread the needle movement sensor through the extractor tube slit Б and up the connector up through the tube. Screw the extractor tube onto the injection nozzle. 2 8 Fig. 9 Place bridge А over the extractor tube. The bridge rests on the cylinder head bolts. Screw on knurled nut В . 1 3 9 Fig. 10 Withdraw the injection nozzle by turning the knur- led nut. Clean the nozzle seat in the nozzle bushing. 10 34