Removing and installing heat exchanger D Drain off coolant, see Page 43 Fig. 1 Remove mounting bolts from the coolant elbow between expansion tank and seawater heat ex- change. 1 Fig. 2 The seawater connecting pipe from the intercooler is fastened to the heat exchanger by means of a plug connection. To remove them, unscrew pres- sure flange. Remove pipe clamps from the seawater pipe and pull out pipe plug connection. 2 Fig. 3 Remove mounting bolts from the heat exchanger brackets. Take off heat exchanger. The heat exchanger is attached in reverse se- quence. When assembling, fit new O-rings at the plug con- nection. 3 57